Vi möjliggör effektiva och hållbara energiprocesser

Genom att kombinera djup materialkunskap med robust flödesteknik hjälper vi våra kunder att öka energieffektiviteten, minska utsläpp och säkerställa driftsäker hantering av korrosiva och slitande medier.

We focus mainly on the following processes:

• Condensate treatment
• Flue gas condensation
• Flue gas cleaning

Condensate treatment

Flue gas condensate is primarily purified using membrane technology, which provides energy and chemical savings. Membrane technology covers everything from dilution water production from flue gas condensate to simple cases with requirements for particle content and pH.

Flue gas condensation

The basis of the technology is a moist fuel (typically biofuel or waste) and a recipient of low-grade energy (typically district heating). The moisture in the fuel vaporises before combustion of the fuel, which is an energy loss. However, with different technologies, the energy yield from the fuel can be increased, resulting in a large saving in terms of reduced fuel demand and also providing significant environmental benefits. Carbon dioxide emissions decrease with fuel demand and the flue gas leaving the plant is cleaned in the process.

Flue gas cleaning

In combination with flue gas liquefaction, flue gas cleaning is a natural feature. Flue gas cleaning systems have the task of reducing the amount of environmentally and health hazardous emissions to the atmosphere. These include heavy metals, dioxins, eutrophying and acidifying substances. Many of these substances are toxic and carcinogenic. It is therefore important to minimise their emissions. By removing sulphur dioxide and nitrogen oxides from flue gas, the acidification of forests and lakes has been significantly reduced. The purification is usually done with scrubbers or textile barrier filters with carbon and lime dosing.

Förutom energianläggningar förekommer rökgasrening även inom bla stål-, kemi- och processindustrier för rening av rökgaser, som bildas vid förbränning av bl.a. farligt-, kommunalt- och industriavfall samt biobränslen.

The process typically involves scrubber fluids, quench fluids, condensate and lime slurry but also sludge and liquor handling. The fluids are corrosive and/or abrasive and we supply plastic lined shaft sealed pumps, thermoplastic valves, GRP pipes and GRP tanks and GRP scrubbers.

I miljön runt skrubbrar och tankar kan vi erbjuda gallerdurkar och bärande konstruktion som klarar korrosionsmiljön som görs i glasfiber, GRP.

För slamhantering erbjuder vi hose pumps och kompletta doserstationer för dosering. För reglering av rökgasflöden erbjuder vi också flue gas damper av korrosionsbeständig GRP eller stålkvaliteter.